Power Transmission

Power Transmission
Set Descending Direction
View as List Grid

1571 items

per page
  1. Shaft Mounted Speed Reducer H Type Gear Box Standard
    Rating:
    0%
    We are offering SMSR Gearboxes in six different sizes (C, D, E, F, G & H) with three ratios of 5:1, 13:1, & 20:1. The gears are helical type and are manufactured on CNC machines and are case hardened with a hard wear layer and a softer core so as to resist shock loads. The Shaft Mounted Speed Reducer Gearboxes are facilitated with metallic double lip oil seals. This help blocks out the dirt from the outside atmosphere. All gears are fully tested for gear cracks, noise, and leaks for a trouble-free operation. The gear units have an advanced tooth design to give higher power and torque. --> FREE SHIPPING <-- ₹ 56380.00 + 18% GST = ₹ 66528.00 Learn More
    ₹56,380.00
  2. Shaft Mounted Speed Reducer G Type Gear Box Hold Back
    Rating:
    0%
    We are offering SMSR Gearboxes in six different sizes (C, D, E, F, G & H) with three ratios of 5:1, 13:1, & 20:1. The gears are helical type and are manufactured on CNC machines and are case hardened with a hard wear layer and a softer core so as to resist shock loads. The Shaft Mounted Speed Reducer Gearboxes are facilitated with metallic double lip oil seals. This help blocks out the dirt from the outside atmosphere. All gears are fully tested for gear cracks, noise, and leaks for a trouble-free operation. The gear units have an advanced tooth design to give higher power and torque. --> FREE SHIPPING <-- ₹ 42231.00 + 18% GST = ₹ 49832.00 Learn More
    ₹42,231.00
  3. Worm Gear Box Horizontal Drive with Double Output Shaft CU-H
    Rating:
    0%
    The Worm Gear Box reduction ratio is determined by the number of starts of the worm and number of teeth on the worm gear.Worm gear sets are used to transmit power between non-parallel, non-intersecting shafts, usually having a shaft angle of 90 degrees. The direction of rotation of the worm wheel depends upon the direction of rotation of the worm, and whether the worm teeth are cut in a left-hand or right-hand direction.However right hand worm and worm gear sets are considered standard. --> FREE SHIPPING <-- Learn More
    ₹8,652.00
  4. Worm Gear Box Vertical Output Drive CU-V
    Rating:
    0%
    The Worm Gear Box reduction ratio is determined by the number of starts of the worm and number of teeth on the worm gear.Worm gear sets are used to transmit power between non-parallel, non-intersecting shafts, usually having a shaft angle of 90 degrees. The direction of rotation of the worm wheel depends upon the direction of rotation of the worm, and whether the worm teeth are cut in a left-hand or right-hand direction.However right hand worm and worm gear sets are considered standard. --> FREE SHIPPING <-- Learn More
    ₹9,012.00
  5. V Belt Pulley Single Groove A and B Section 2 to 6 Inches
    Rating:
    0%
    A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. Learn More
    ₹635.00
  6. V Belt Pulley Double Groove A and B Section 2 to 6 Inches
    Rating:
    0%
    A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. Learn More
    ₹427.00
  7. V Belt Pulley 20 Inch Single Groove A and B Section - 1 Pcs Pack
    Rating:
    0%
    A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. --> FREE SHIPPING <-- ₹ 2100.00 + 18% GST = ₹ 2478.00 (Pilot Bore) / ₹ 2479.00 + 18% GST = ₹ 2926.00 (with required Bore and Key way) Learn More
    ₹2,100.00
  8. V Belt Pulley 2 Inch Single Groove A and B Section - 2 Pcs Pack
    Rating:
    0%
    A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. --> FREE SHIPPING <-- ₹ 422.00 + 18% GST = ₹ 498.00 (Pilot Bore) / ₹ 585.00 + 18% GST = ₹ 690.00 (with required Bore and Key way) Learn More
    ₹422.00
  9. V Belt Pulley 2.1/2 Inch Single Groove A and B Section - 2 Pcs Pack
    Rating:
    0%
    A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. -> FREE SHIPPING <-- ₹ 478.00 + 18% GST = ₹ 564.00 (Pilot Bore) / ₹ 640.00 + 18% GST = ₹ 756.00 (with required Bore and Key way) Learn More
    ₹478.00
  10. V Belt Pulley 3 Inch Single Groove A and B Section - 2 Pcs Pack
    Rating:
    0%
    A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. --> FREE SHIPPING <-- ₹ 533.00 + 18% GST = ₹ 629.00 (Pilot Bore) / ₹ 696.00 + 18% GST = ₹ 821.00 (with required Bore and Key way) Learn More
    ₹533.00
Set Descending Direction
View as List Grid

1571 items

per page