Shop By Categories
-
Worm Gear Box Horizontal Single Output Shaft Drive CU-HThe Worm Gear Box reduction ratio is determined by the number of starts of the worm and number of teeth on the worm gear.Worm gear sets are used to transmit power between non-parallel, non-intersecting shafts, usually having a shaft angle of 90 degrees. The direction of rotation of the worm wheel depends upon the direction of rotation of the worm, and whether the worm teeth are cut in a left-hand or right-hand direction.However right hand worm and worm gear sets are considered standard. --> FREE SHIPPING <-- Learn More₹8,364.00 -
Shaft Mounted Speed Reducer H Type Gear Box StandardWe are offering SMSR Gearboxes in six different sizes (C, D, E, F, G & H) with three ratios of 5:1, 13:1, & 20:1. The gears are helical type and are manufactured on CNC machines and are case hardened with a hard wear layer and a softer core so as to resist shock loads. The Shaft Mounted Speed Reducer Gearboxes are facilitated with metallic double lip oil seals. This help blocks out the dirt from the outside atmosphere. All gears are fully tested for gear cracks, noise, and leaks for a trouble-free operation. The gear units have an advanced tooth design to give higher power and torque. --> FREE SHIPPING <-- ₹ 56380.00 + 18% GST = ₹ 66528.00 Learn More₹56,380.00 -
Shaft Mounted Speed Reducer G Type Gear Box Hold BackWe are offering SMSR Gearboxes in six different sizes (C, D, E, F, G & H) with three ratios of 5:1, 13:1, & 20:1. The gears are helical type and are manufactured on CNC machines and are case hardened with a hard wear layer and a softer core so as to resist shock loads. The Shaft Mounted Speed Reducer Gearboxes are facilitated with metallic double lip oil seals. This help blocks out the dirt from the outside atmosphere. All gears are fully tested for gear cracks, noise, and leaks for a trouble-free operation. The gear units have an advanced tooth design to give higher power and torque. --> FREE SHIPPING <-- ₹ 42231.00 + 18% GST = ₹ 49832.00 Learn More₹42,231.00 -
Worm Gear Box Horizontal Drive with Double Output Shaft CU-HThe Worm Gear Box reduction ratio is determined by the number of starts of the worm and number of teeth on the worm gear.Worm gear sets are used to transmit power between non-parallel, non-intersecting shafts, usually having a shaft angle of 90 degrees. The direction of rotation of the worm wheel depends upon the direction of rotation of the worm, and whether the worm teeth are cut in a left-hand or right-hand direction.However right hand worm and worm gear sets are considered standard. --> FREE SHIPPING <-- Learn More₹8,652.00 -
Worm Gear Box Vertical Output Drive CU-VThe Worm Gear Box reduction ratio is determined by the number of starts of the worm and number of teeth on the worm gear.Worm gear sets are used to transmit power between non-parallel, non-intersecting shafts, usually having a shaft angle of 90 degrees. The direction of rotation of the worm wheel depends upon the direction of rotation of the worm, and whether the worm teeth are cut in a left-hand or right-hand direction.However right hand worm and worm gear sets are considered standard. --> FREE SHIPPING <-- Learn More₹9,012.00 -
Shaft Mounted Speed Reducer C Type Gear Box StandardWe are offering SMSR Gearboxes in six different sizes (C,D,E,F,G & H) with three ratios of 5:1, 13:1, & 20:1. The gears are helical type and are manufactured on CNC machines and are case hardened with a hard wear layer and a softer core so as to resist shock loads. The Shaft Mounted Speed Reducer Gearboxes are facilitated with metallic double lip oil seals. This help blocks out the dirt from the outside atmosphere. All gears are fully tested for gear cracks, noise, and leaks for a trouble-free operation. The gear units have an advanced tooth design to give higher power and torque. --> FREE SHIPPING <-- ₹ 9180.00 + 18% GST = ₹ 10833.00 Learn More₹9,180.00 -
Shaft Mounted Speed Reducer D Type Gear Box StandardWe are offering SMSR Gearboxes in six different sizes (C,D,E,F,G & H) with three ratios of 5:1, 13:1, & 20:1. The gears are helical type and are manufactured on CNC machines and are case hardened with a hard wear layer and a softer core so as to resist shock loads. The Shaft Mounted Speed Reducer Gearboxes are facilitated with metallic double lip oil seals. These help blocking out the dirt from the outside atmosphere. All gears are fully tested for gear cracks, noise, and leaks for a trouble free operation. The gear units have an advanced tooth design to give higher power and torque. --> FREE SHIPPING <-- ₹ 11411.00 + 18% GST = ₹ 13465.00 Learn More₹11,411.00 -
Shaft Mounted Speed Reducer E Type Gear Box StandardWe are offering SMSR Gearboxes in six different sizes (C,D,E,F,G & H) with three ratios of 5:1, 13:1, & 20:1. The gears are helical type and are manufactured on CNC machines and are case hardened with a hard wear layer and a softer core so as to resist shock loads. The Shaft Mounted Speed Reducer Gearboxes are facilitated with metallic double lip oil seals. This help block out the dirt from the outside atmosphere. All gears are fully tested for gear cracks, noise, and leaks for a trouble-free operation. The gear units have an advanced tooth design to give higher power and torque. --> FREE SHIPPING <-- ₹ 17106.00 + 18% GST = ₹ 20185.00 Learn More₹17,106.00 -
Shaft Mounted Speed Reducer F Type Gear Box StandardWe are offering SMSR Gearboxes in six different sizes (C,D,E,F,G & H) with three ratios of 5:1, 13:1, & 20:1. The gears are helical type and are manufactured on CNC machines and are case hardened with a hard wear layer and a softer core so as to resist shock loads. The Shaft Mounted Speed Reducer Gearboxes are facilitated with metallic double lip oil seals. These help blocking out the dirt from the outside atmosphere. All gears are fully tested for gear cracks, noise, and leaks for a trouble free operation. The gear units have an advanced tooth design to give higher power and torque. --> FREE SHIPPING <-- ₹ 25500.00 + 18% GST = ₹30490.00 Learn More₹25,500.00 -
Shaft Mounted Speed Reducer G Type Gear Box StandardWe are offering SMSR Gearboxes in six different sizes (C,D,E,F,G & H) with three ratios of 5:1, 13:1, & 20:1. The gears are helical type and are manufactured on CNC machines and are case hardened with a hard wear layer and a softer core so as to resist shock loads. The Shaft Mounted Speed Reducer Gearboxes are facilitated with metallic double lip oil seals. These help blocking out the dirt from the outside atmosphere. All gears are fully tested for gear cracks, noise, and leaks for a trouble free operation. The gear units have an advanced tooth design to give higher power and torque. --> FREE SHIPPING <-- ₹ 38911.00 + 18% GST = ₹ 45915.00 Learn More₹38,911.00
Shop By Categories
Filter
Now Shopping by
Shopping Options
- Manufacturer Comet Industries Remove This Item
- Quote Status Yes Remove This Item
- Availability in stock Remove This Item