High suction with self priming :- up to 7.5 m / Low power consumption :- Yes / Maximum working pressure :- 3.4 kg / cm² / Operating water temperature :- Ambient temperature / Suitable for :- Single Phase supply / Cable length and Size :- 0.3 m & 1.0 sq. mm / Power supply cable :- Yes / Direction of rotating :- Anti-clockwise when viewed from driving end / Dynamically balanced rotor :- Yes / Motor body :- High-quality Extruded aluminum body / Motor speed :- 2900 Revolution per minute / Motor stator :- Low Watt loss silicon steel lamination / Pipe size :- 25 mm x 25 mm (2.5 cm x 2.5 cm) / Winding type :- Copper winding / Power :- 0.75 kW (1.0 HP) / Rated frequency :- 50 Hz / Voltage operating range :- 180 V to 240 V / Pump casing :- Cast iron / Impeller :- Forged brass / Shaft :- Carbon Steel Pump Shaft / Discharge in litre hour at various heights :-6 metre in L / h :- 2700 L / h ---> FREE SHIPPING <---
Learn More
High suction with self priming :- up to 8 m / Low power consumption :- Yes / Maximum working pressure :- 3 kg/cm² / Operating water temperature :- up to 65 °C / Suitable for :- Single Phase supply / Power supply cable :- Yes / Direction of rotating :- Anti-clockwise when viewed from driving end / Motor speed :- 1500 Revolution per minute / Power :- 0.37 kW (0.5 HP) / Rated frequency :- 50 Hz / Voltage operating range :- 180 V to 240 V / Pump motor coupling as per keyway :- Yes / Rated input current :- 3.4 Ampere / Ss vs teflon carbon thrust bearing set ltb bush on both side :- Yes /Pump casing Graded :- Cast Iron / Impeller :- Forged brass / Shaft :- Stainless Steel (SS-410) ---> FREE SHIPPING <---
Learn More
A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion.
--> FREE SHIPPING <-- ₹ 430.00 + 18% GST = ₹ 507.00 (Pilot Bore) / ₹ 593.00 + 18% GST = ₹ 699.00 (with required Bore and Key way) Learn More
A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion.
--> FREE SHIPPING <-- ₹ 571.00 + 18% GST = ₹ 674.00 (Pilot Bore) / ₹ 734.00 + 18% GST = ₹ 866.00 (with required Bore and Key way) Learn More
A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion.
--> FREE SHIPPING <-- ₹ 604.00 + 18% GST = ₹ 713.00 (Pilot Bore) / ₹ 767.00 + 18% GST = ₹ 767.00 (with required Bore and Key way) Learn More
A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion.
--> FREE SHIPPING <-- ₹ 637.00 + 18% GST = ₹ 752.00 (Pilot Bore) / ₹ 854.00 + 18% GST = ₹ 1008.00 (with required Bore and Key way) Learn More
A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion.
--> FREE SHIPPING <-- ₹ 711.00 + 18% GST = ₹ 839.00 (Pilot Bore) / ₹ 928.00 + 18% GST = ₹ 1095.00 (with required Bore and Key way) Learn More
A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion.
--> FREE SHIPPING <-- ₹ 744.00 + 18% GST = ₹ 878.00 (Pilot Bore) / ₹ 961.00 + 18% GST = ₹ 1134.00 (with required Bore and Key way) Learn More
A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion.
--> FREE SHIPPING <-- ₹ 897.00 + 18% GST = ₹ 1058.00 (Pilot Bore) / ₹ 1114.00 + 18% GST = ₹ 1314.00 (with required Bore and Key way) Learn More
A Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion.
--> FREE SHIPPING <-- ₹ 998.00 + 18% GST = ₹ 1178.00 (Pilot Bore) / ₹ 1270.00 + 18% GST = ₹ 1498.00 (with required Bore and Key way) Learn More
-29%Havells 1.0 HP Single Phase Self Priming Monoblock PumpHigh suction with self priming :- up to 7.5 m / Low power consumption :- Yes / Maximum working pressure :- 3.4 kg / cm² / Operating water temperature :- Ambient temperature / Suitable for :- Single Phase supply / Cable length and Size :- 0.3 m & 1.0 sq. mm / Power supply cable :- Yes / Direction of rotating :- Anti-clockwise when viewed from driving end / Dynamically balanced rotor :- Yes / Motor body :- High-quality Extruded aluminum body / Motor speed :- 2900 Revolution per minute / Motor stator :- Low Watt loss silicon steel lamination / Pipe size :- 25 mm x 25 mm (2.5 cm x 2.5 cm) / Winding type :- Copper winding / Power :- 0.75 kW (1.0 HP) / Rated frequency :- 50 Hz / Voltage operating range :- 180 V to 240 V / Pump casing :- Cast iron / Impeller :- Forged brass / Shaft :- Carbon Steel Pump Shaft / Discharge in litre hour at various heights :-6 metre in L / h :- 2700 L / h ---> FREE SHIPPING <--- Learn Morewas ₹5,720.00 Special Price ₹4,077.00
-6%Havells 0.5 HP Self Priming Hi-Flow D-2 Monoblock PumpHigh suction with self priming :- up to 8 m / Low power consumption :- Yes / Maximum working pressure :- 3 kg/cm² / Operating water temperature :- up to 65 °C / Suitable for :- Single Phase supply / Power supply cable :- Yes / Direction of rotating :- Anti-clockwise when viewed from driving end / Motor speed :- 1500 Revolution per minute / Power :- 0.37 kW (0.5 HP) / Rated frequency :- 50 Hz / Voltage operating range :- 180 V to 240 V / Pump motor coupling as per keyway :- Yes / Rated input current :- 3.4 Ampere / Ss vs teflon carbon thrust bearing set ltb bush on both side :- Yes /Pump casing Graded :- Cast Iron / Impeller :- Forged brass / Shaft :- Stainless Steel (SS-410) ---> FREE SHIPPING <--- Learn Morewas ₹10,800.00 Special Price ₹10,100.00
V Belt Pulley 3.1/2 Inch Single Groove C Section - 1 Pcs PackA Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. --> FREE SHIPPING <-- ₹ 430.00 + 18% GST = ₹ 507.00 (Pilot Bore) / ₹ 593.00 + 18% GST = ₹ 699.00 (with required Bore and Key way) Learn More₹430.00
V Belt Pulley 4 Inch Single Groove C Section - 1 Pcs PackA Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. --> FREE SHIPPING <-- ₹ 571.00 + 18% GST = ₹ 674.00 (Pilot Bore) / ₹ 734.00 + 18% GST = ₹ 866.00 (with required Bore and Key way) Learn More₹571.00
V Belt Pulley 4.1/2 Inch Single Groove C Section - 1 Pcs PackA Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. --> FREE SHIPPING <-- ₹ 604.00 + 18% GST = ₹ 713.00 (Pilot Bore) / ₹ 767.00 + 18% GST = ₹ 767.00 (with required Bore and Key way) Learn More₹604.00
V Belt Pulley 5 Inch Single Groove C Section - 1 Pcs PackA Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. --> FREE SHIPPING <-- ₹ 637.00 + 18% GST = ₹ 752.00 (Pilot Bore) / ₹ 854.00 + 18% GST = ₹ 1008.00 (with required Bore and Key way) Learn More₹637.00
V Belt Pulley 5.1/2 Inch Single Groove C Section - 1 Pcs PackA Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. --> FREE SHIPPING <-- ₹ 711.00 + 18% GST = ₹ 839.00 (Pilot Bore) / ₹ 928.00 + 18% GST = ₹ 1095.00 (with required Bore and Key way) Learn More₹711.00
V Belt Pulley 6 Inch Single Groove C Section - 1 Pcs PackA Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. --> FREE SHIPPING <-- ₹ 744.00 + 18% GST = ₹ 878.00 (Pilot Bore) / ₹ 961.00 + 18% GST = ₹ 1134.00 (with required Bore and Key way) Learn More₹744.00
V Belt Pulley 7 Inch Single Groove C Section - 1 Pcs PackA Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. --> FREE SHIPPING <-- ₹ 897.00 + 18% GST = ₹ 1058.00 (Pilot Bore) / ₹ 1114.00 + 18% GST = ₹ 1314.00 (with required Bore and Key way) Learn More₹897.00
V Belt Pulley 8 Inch Single Groove C Section - 1 Pcs PackA Pulley is a mechanism composed of a wheel on an axle or shaft that may have a groove between two flanges around its circumference. A rope, cable, belt, or chain usually runs over the wheel and inside the groove, if present Pulleys are used to change the direction of an applied force, transmit rotational motion or realize a mechanical advantage in either a linear or rotational system of motion. --> FREE SHIPPING <-- ₹ 998.00 + 18% GST = ₹ 1178.00 (Pilot Bore) / ₹ 1270.00 + 18% GST = ₹ 1498.00 (with required Bore and Key way) Learn More₹998.00