DIMENSIONS :- Bore diameter d = 50 mm / Shoulder diameter inner ring d1 ≈ 62.1 mm / Overall width A = 49 mm / Width of piloting groove A1 = 16 mm / Width of flange in which piloting grooves are provided A2 = 37 mm / Standout of end cover A5 = 33 / Width of inner ring B = 51.6 mm / Distance from locking device side face to thread centre B4 = 9.5 mm / Overall Height H = 117 mm / Distance between bottoms of piloting grooves H1 = 102 mm / Height of attachment end H2 = 83 mm / Overall length L = 148 mm / Distance from attachment end face to centre line of spherical seat diameter L1 = 90 mm / Length attachment L2 = 16 mm / Length of piloting groove L3 = 86 mm / Diameter of attachment bolt hole N = 29 mm / Length of attachment slot N1 = 19 mm / Height of attachment slot N2 = 49 mm / Distance from locking device side face to raceway centre s1 = 32.6 mm
Take-up bearings are a type of mounted bearing primarily used for adjusting and maintaining conveyor belt tension. Take-up is the process of adjusting the length of the belt and chain to compensate for stretch, shrinkage, or wear, and to maintain proper tension.